IBS Successfully Grows Graphite by Moving Carbon Inside Metal with Electric Current
Thermal Conductivity 4-5 Times Higher Than Copper... Potential for Use in Quantum Materials

A technology has been developed that uses electromigration, a phenomenon known to damage semiconductor circuits, to grow graphite and control the ratio of carbon isotopes. This new method controls the direction in which atoms move using electric current to grow materials at desired locations, and could potentially be used in the development of quantum materials.


The Institute for Basic Science (IBS) said on the 19th that a research team led by Rodney Ruoff, director of the Center for Multidimensional Carbon Materials, had successfully grown graphite by passing direct current through cobalt and nickel and moving carbon inside the metals in one direction.

Principle and experimental results of current-driven graphite growth. The top panels show the experimental setup and principle (a, b): current is passed through cobalt and nickel metal rods to move carbon and grow graphite. The lower-left and center panels show graphite growth over time when direct current (c) and alternating current (d) are applied. With direct current, carbon moved toward the cathode, forming graphite layers, while this phenomenon was not observed with alternating current. The panels on the right show Raman spectroscopy and X-ray diffraction results (e, f) confirming the structure of the graphite produced. Courtesy of the researchers.

Principle and experimental results of current-driven graphite growth. The top panels show the experimental setup and principle (a, b): current is passed through cobalt and nickel metal rods to move carbon and grow graphite. The lower-left and center panels show graphite growth over time when direct current (c) and alternating current (d) are applied. With direct current, carbon moved toward the cathode, forming graphite layers, while this phenomenon was not observed with alternating current. The panels on the right show Raman spectroscopy and X-ray diffraction results (e, f) confirming the structure of the graphite produced. Courtesy of the researchers.

View original image

Electromigration is a phenomenon in which atoms move in a particular direction when electrons transfer force to them or an electric field acts on them as current flows through a metal. In semiconductors, atoms inside wiring can move and leave voids or accumulate in certain areas, causing failures such as broken circuits.


The research team used this phenomenon to grow materials. When they placed a carbon source at the center of a metal rod and passed direct current through it for 50 hours, the carbon moved toward the cathode and formed graphite layers.


By contrast, when they passed alternating current, whose direction changes periodically, no thick graphite layer formed far from the carbon source. The results confirmed that the unidirectional movement of carbon caused by electric current, rather than simply applying heat, is important for graphite growth.


Carbon Moves with the Current... Isotope Ratios Controlled as Well


The research team also confirmed that the ratio of carbon isotopes can be controlled using electric current. Carbon exists as carbon-12 and carbon-13, which have different atomic masses. The two isotopes have nearly identical chemical properties, but their different masses can cause them to move at different speeds inside metals.


In experiments using six carbon sources with different proportions of carbon-13, the research team found that the proportion of carbon-12 in the newly grown graphite was higher than in the source in every case.


In particular, when a source containing 47.4% carbon-13 was placed in a nickel rod, the proportion of carbon-13 in the newly grown graphite fell to 38.4%. The researchers concluded that the relatively lighter carbon-12 moved faster and therefore contributed preferentially to graphite growth.


These differences in isotope composition also affected graphite's thermal conductivity. Graphite grown on nickel had thermal conductivity four to five times that of copper in the direction in which heat travels along the carbon layers. Graphite grown with the natural carbon composition showed the highest thermal conductivity, while graphite with an intermediate composition containing a mixture of the two isotopes had lower thermal conductivity. This is because the mixing of atoms with different masses impedes heat transfer.

IBS researchers (from left): Rodney Ruoff, director of the IBS Center for Multidimensional Carbon Materials (co-corresponding author); research fellow Sung Wonkyung (co-corresponding author); and student researcher Alisher Sultangaziyev (co-first author). Senior researcher Kim Yongcheol (co-first author). Provided by IBS.

IBS researchers (from left): Rodney Ruoff, director of the IBS Center for Multidimensional Carbon Materials (co-corresponding author); research fellow Sung Wonkyung (co-corresponding author); and student researcher Alisher Sultangaziyev (co-first author). Senior researcher Kim Yongcheol (co-first author). Provided by IBS.

View original image

This study is significant because it used electromigration, previously regarded as a problem to be suppressed, as a means of controlling where a material grows and its isotope composition.


Co-corresponding author Sung Wonkyung, an IBS research fellow, said, "The results show the potential for using electromigration, previously regarded as a problem to be suppressed, as a tool for determining where a material grows."


The research team expects that the technology for controlling carbon isotope ratios could be used to develop carbon materials for quantum sensors and quantum computers. However, this study demonstrated the possibility of controlling composition by using differences in isotope movement speeds; it did not establish technology for high-purity isotope separation or mass production.



The results were published online on October 28 in the international journal Advanced Materials.


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing