[Field Report] SK hynix's Trinity Fab Lowers MPE Firms' "Final Hurdle"... A Look Inside the Facility
A look at the Trinity Fab construction site in Yongin
A 1,000-pyeong test bed with 51 pieces of equipment
Completion slated for May 2027; full-scale operations to begin in Q4
"Cutting MPE development time by more than 30%"
"In a marathon, the final 10 kilometers are the toughest stretch, known as 'the wall.' The technology development process for our materials, parts and equipment (MPE) companies is similar."
At the SK hynix Yongin Semiconductor Cluster construction site in Wonsam-myeon, Cheoin-gu, Yongin, Gyeonggi Province, on November 10. Yang Jidong, head of the SK hynix Yongin Planning Team, compared the challenges domestic MPE companies face during technology development to running a marathon. Even after developing new materials and equipment, the final stage of applying them to actual semiconductor production lines and validating their performance is the most difficult, he said. "The Trinity Fab is not simply a place that lends out equipment. It runs alongside MPE companies through the final stretch so they can cross the finish line of applying their products to mass production," Yang said.
Yang Ji-dong, head of SK hynix’s Yongin Planning Team, explains plans for the Trinity fab development at the construction site of the SK hynix Yongin Semiconductor Cluster in Cheoin-gu, Yongin, Gyeonggi Province, on the 10th. SK hynix
View original imageConstruction was in full swing at the Yongin Semiconductor Cluster when we visited that day. After driving for about an hour and a half from Seoul, we arrived at a site where large cranes were lifting materials and trucks and excavators were moving about busily. About 20,000 workers are deployed each day at the industrial complex, which covers approximately 1.26 million pyeong. Work was underway at various locations to finish building exteriors and install interior equipment.
SK hynix plans to build a total of four fabs here, and construction of the first fab is now 89% complete. Work on the industrial complex's infrastructure is 95.5% complete. The first fab is scheduled to complete its cleanroom in February 2027 and begin full-scale mass production in the fourth quarter of 2027.
Accompanied by a site official, we boarded a climber, a large elevator used during construction. The elevator can carry up to 80 people and transport 16 metric tons of materials at a time. After riding the climber to the third floor, 20 to 30 meters above ground, we found ourselves in a vast space where no equipment had yet been installed. This is where the Trinity Fab will be built as part of SK hynix's efforts to support technology validation for domestic MPE companies.
At the Trinity Fab construction site in SK hynix's Yongin Semiconductor Cluster in Cheoin-gu, Yongin, Gyeonggi Province, on the 10th. The 1,000-pyeong space is set to house 51 pieces of semiconductor process equipment to support technology validation for domestic materials, parts and equipment companies. SK hynix
View original imageScheduled for completion in May 2027, the Trinity Fab will cover approximately 1,000 pyeong (3,305 square meters), about half the size of a soccer field. It is set to house 51 pieces of equipment for semiconductor processes, including lithography, etching, deposition, cleaning, analysis and measurement. Including four computer systems, a total of 55 pieces of equipment and systems will be installed.
The facility's key feature is that it will allow companies to validate their technologies in an environment equivalent to SK hynix's actual mass-production lines. The Trinity Fab is located inside the first fab in Yongin. Separated by a single wall, SK hynix's semiconductor production facilities and the MPE companies' technology validation facilities will sit side by side.
"The wall is there only to separate the facilities for security reasons. On the other side is the cleanroom where SK hynix actually produces memory semiconductors," Yang said. "We plan to provide the Trinity Fab with the same cleanroom environment and mass-production equipment."
Until now, domestic mid-sized and small MPE companies have struggled to validate the performance of new materials and equipment in an actual mass-production environment, even after developing them. Establishing their own validation facilities can cost hundreds of billions to trillions of won, and there are no domestic test beds for mass-production trials. As a result, commercialization and entry into domestic and overseas markets are often delayed even after technology development is complete.
Construction is underway on the first fab at SK hynix's Yongin Semiconductor Cluster in Cheoin-gu, Yongin, Gyeonggi Province, on the 10th. Photo by Jang Bogyeong
View original imageThe Trinity Fab was established to address these challenges. MPE companies will be able to test the materials and equipment they have developed under conditions comparable to an actual mass-production environment, make adjustments if problems arise, and then validate them again. The Trinity Fab will also have 15 separate rental spaces, each approximately 13.5 pyeong in size, for companies that want to bring in and test their own equipment.
SK hynix, the government and local governments will invest a total of KRW 874.6 billion in the project. SK hynix will contribute KRW 443.2 billion, the government KRW 373.6 billion, and Gyeonggi Province and Yongin City KRW 57.7 billion. The facility will be operated by the Trinity Fab Foundation, an independent nonprofit entity.
SK hynix aims to shorten the time it takes MPE companies to commercialize their technologies by more than 30% through the Trinity Fab. "It generally takes about three to four years to develop equipment and apply it to an actual mass-production line," said Lee Gijeong, head of the Trinity Fab Foundation. "Our goal is to cut that time by at least 30% through the Trinity Fab."
An MPE industry cluster covering approximately 140,000 pyeong is also being developed about a two-minute walk from the first fab. More than 50 companies, including Jusung Engineering, Lam Research Korea, ASML and PSK, are expected to move in. Some companies will begin construction as early as December. In effect, semiconductor production facilities, technology validation facilities and partner companies' factories will all be brought together in one location.
Lee Gijeong, head of the Trinity Fab Foundation, explains the Trinity Fab on the 10th at the SK hynix Yongin Semiconductor Cluster in Cheoin-gu, Yongin, Gyeonggi Province. Photo by Jang Bokyeong.
View original imageMPE companies are also looking forward to the project. "Until now, the development environment for equipment and the environment on actual mass-production lines have been different, so we often had to redevelop products from scratch," said Lee Jaeho, vice chairman of TES, a manufacturer of semiconductor deposition equipment. "We recently built our own research and development (R&D) facility, about 1,000 pyeong in size. If we had known the Trinity Fab was coming, we wouldn't have built it."
"Measurement instruments cost KRW 1 billion to KRW 5 billion each, making it difficult for individual companies to acquire all of them," Lee said. "Using the Trinity Fab's shared infrastructure will greatly reduce development costs and time." He added, "Even when semiconductor production capacity is in short supply, SK hynix has made space available for MPE companies. That is immensely meaningful and difficult to quantify in monetary terms. The Trinity Fab will bring new changes to Korea's semiconductor MPE ecosystem."
Yoo Wonyang, CEO of TEMC, a company specializing in gases for semiconductors, also highlighted the potential to reduce the time needed for technology validation. "Evaluating materials usually takes six months and can take as long as two years. But actual mass-production equipment is constantly in operation, making evaluations difficult," Yoo said. "Having a dedicated evaluation fab like the Trinity Fab could significantly shorten the time required."
SK hynix expects that shortening the mass-production validation period through the Trinity Fab will help increase the localization rate of MPE while also strengthening domestic MPE companies' competitiveness in the global market.
Hot Picks Today
"Two Spend 500,000 Won in a Flash, Yet Wait Two Hours?" ... 'Dreamland' Shunned by Kids and Foreign Tourists
- The Era of Getting 200 Million Won After 30 Years Is Over... A Japanese Bank's "Perpetual Department Head" Who Just Clocked In Cries Out
- Spain Hit by Its Worst Tragedy... Lee Kangin, Moreno and Real Madrid Join Soccer World in Mourning
- They Said, “Make It Your Home for Life” - Then Suddenly Kicked 200 Passengers Off... What Happened to the Around-the-World Cruise?
- "130 Rice Bowls Sold Out in a Day"... 'Unfiltered Face' Adds 8 Million Won to Night Market Sales: China's Bungeunwoo
"The competitiveness of MPE companies is the competitiveness of chipmakers," Lee said. "We will provide a range of infrastructure to help achieve both goals: increasing the localization rate of MPE and enabling domestic MPE companies to enter the global market."
© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.