World's largest cathode material plant... enough for 850,000 EVs

Quality control through contamination prevention and process automation

In-house precursor production brings supply chain in-house

"The beginning and end of every product is quality analysis." These were the first words spoken by Jeong Jaeyong, head of Cathode Materials Plant 1, in front of the quality analysis lab at POSCO Future M's Gwangyang cathode material plant in the Yulchon Industrial Complex in Jeonnam-Gwangju Integrated Special City on November 3. Inside the lab, a robot was picking up cathode material samples and placing them one by one into analysis equipment. The process of manually taking samples and loading them into the equipment had been automated, and Plant Head Jeong emphasized that the most important thing was how quickly and accurately the samples could be analyzed.

An employee inspects production equipment at POSCO Future M's Gwangyang cathode materials plant. Workers wear head and shoe covers to prevent foreign substances from contaminating the products. POSCO Future M

An employee inspects production equipment at POSCO Future M's Gwangyang cathode materials plant. Workers wear head and shoe covers to prevent foreign substances from contaminating the products. POSCO Future M

View original image

Quality control began even before entering the plant. Visitors had to put an additional layer of nonwoven covers over their hard hats and safety shoes. This procedure was not required at another plant visited that same day. Plant Head Jeong explained that the rule was intended to prevent foreign substances from getting into the cathode materials. The goal is to keep even a single strand of hair or a speck of dust on a shoe from getting into the products.


This is the world's largest cathode material plant by single-site capacity, with an annual production capacity of 90,000 tons. That is enough material for about 850,000 electric vehicles equipped with 70-kWh batteries. Plant Head Jeong cited Tesla Model 3- or Model Y-class vehicles as examples. The plant produces ternary cathode materials such as NCM, NCA and NCMA on 13 production lines.


Cathode materials are a key component that determines a battery's capacity and output. The letters in their names indicate the metals they contain. NCM means that nickel (N), cobalt (C) and manganese (M) are combined; adding aluminum (A) makes it NCMA. Even NCM materials can have different properties depending on the proportions. According to Plant Head Jeong, NCM622 is a product made up of 60% nickel, 20% cobalt and 20% manganese. The higher the nickel content, the more energy a battery can store.


Particle shape also affects performance. Conventional cathode materials consist of particles made up of many small crystals clustered like bunches of grapes. In single-crystal cathode materials, each particle is one solid crystal, making it stronger, more stable and longer-lasting. In March 2023, the Gwangyang plant became the first in South Korea to commercially produce high-nickel NCMA single-crystal cathode materials.


Upon entering the production building, we were surrounded by the sound of machinery in a space as vast as a soccer field. Inside the long rows of equipment, the cathode materials were undergoing a firing process called calcination. A powder made by mixing precursor and lithium is placed in a square refractory container called a sagger and loaded into a hot kiln. As the sagger moves slowly through the equipment, the powder is fired into a solid material. Automated equipment also handles loading and unloading the saggers instead of workers.


Cathode material fired in a kiln at POSCO Future M's Gwangyang plant is placed in a refractory container called a sagger. It is made by firing a powder of precursor and lithium at high temperatures. POSCO Future M

Cathode material fired in a kiln at POSCO Future M's Gwangyang plant is placed in a refractory container called a sagger. It is made by firing a powder of precursor and lithium at high temperatures. POSCO Future M

View original image

The fired material is crushed into smaller pieces, and magnetic separators remove metallic contaminants such as iron filings. Products with high nickel content have more lithium remaining on their surface. This is washed off with water, then the material is thoroughly dried, like laundry, and fired once more to stabilize the surface. Plant Head Jeong explained that although the process may look simple, it is complex and requires multiple pieces of equipment to work together seamlessly.


Automation is widespread throughout the plant because of the nature of processes that handle powders. The more people are involved, the greater the risk of mistakes and safety hazards. Automated guided vehicles transport raw materials and products, and the raw material and finished product warehouses also operate automatically. Sample capsules collected on the production floor travel to the analysis lab through pneumatic tubes at 5 meters per second. The integrated control center gathers equipment, quality, logistics and safety data in real time, enabling an immediate response to process abnormalities. POSCO Future M uses this facility as a model plant to guide the expansion of its overseas production capacity.


Samples arriving at the analysis lab are tested at a particle scale of 10 micrometers, one-eighth the thickness of a human hair. X-ray equipment is used to examine the crystal structure inside the particles, while other equipment checks whether the proportions of nickel, cobalt and manganese match the design and whether impurities are below the specified limits. Plant Head Jeong compared crystal structure analysis to "checking whether an apartment building has been properly constructed." The final checkpoint is the cell assembly room, which is kept extremely dry at a dew point of minus 77 degrees Celsius. There, the plant makes test batteries and repeatedly charges and discharges them, then checks for gas buildup and swelling before shipping the products.

A view of POSCO Future M's Gwangyang cathode materials plant in Yulchon Industrial Complex, South Jeolla-Gwangju Integrated Special City. With an annual production capacity of 90,000 tons, it is the world's largest single-site plant. POSCO Future M

A view of POSCO Future M's Gwangyang cathode materials plant in Yulchon Industrial Complex, South Jeolla-Gwangju Integrated Special City. With an annual production capacity of 90,000 tons, it is the world's largest single-site plant. POSCO Future M

View original image

The company has also brought its raw material supply chain in-house. On the plant grounds is a precursor plant with an annual capacity of 45,000 tons, completed in June 2025. A precursor, made by mixing nickel, cobalt and manganese, is an intermediate material that forms the backbone of cathode materials. Plant Head Jeong explained that the company previously bought precursors from China to make cathode materials, but now produces them itself. Metal sulfates, the raw materials for precursors, come from POSCO HY Clean Metal, while lithium comes from POSCO Pilbara Lithium Solution. The company says that sourcing everything from raw materials to materials within the group enables it to respond flexibly to global trade regulations.



In July 2026, POSCO Group announced its "Triple Core" strategy, grouping lithium and cathode and anode materials as "strategic resources." The plan is for a company that once made steel to secure and supply battery raw materials and materials directly as well. The Gwangyang cathode material plant is where those strategic resources are turned into actual products.


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing