[Beyond Steel, POSCO's Future on the Ground] 2. A Windowless Control Room, a Basketless Electric Furnace... A Look Inside POSCO's Gwangyang Electric Furnace
South Korea's Largest Electric Furnace... Cuts Carbon Emissions by Up to 75%
Uses Waste Heat to Preheat Scrap, Cutting Power Use by 10%
Operating at 10% Capacity... "A Market for Low-Carbon Steel Must Emerge"
There were no windows in the control room. A dozen or more large monitors covering the walls showed different areas of the plant, and two or three employees operated the equipment while watching the screens. At the electric arc furnace plant at POSCO's Gwangyang Steelworks in Gwangyang, Jeonnam-Gwangju Integrated Special City, which I visited on November 2, there are around 80 cameras monitoring the facility.
Employees operate the equipment while monitoring different areas of the plant on screens in the control room of POSCO's electric arc furnace plant at the Gwangyang Steelworks. POSCO.
View original imageAt a conventional electric arc furnace, the control room is right in front of the furnace, and employees work while watching the molten iron through a window. Ko Myeongguk, technical development section leader at POSCO's Electric Arc Furnace Business Task Force, explained that the Gwangyang furnace was designed with the control room away from the furnace for safety, with employees monitoring and operating the facility using cameras instead of windows.
Completed in June, the electric arc furnace has an annual capacity of 2.5 million tons, making it the largest single facility of its kind in South Korea. It cost approximately KRW 600 billion to build. Because it produces molten iron by melting iron scrap, or scrap metal, in an electric furnace instead of using iron ore and coal, it emits less carbon. Yang Wonjun, head of communications at POSCO Holdings, explained that producing one ton of molten iron in a blast furnace generates about two tons of carbon dioxide, while melting scrap in an electric arc furnace reduces emissions to around 400 kg. According to POSCO's official figures, compared with average blast furnace production from 2017 to 2019, the process can cut direct and indirect carbon emissions by up to about 75% per ton of crude steel. The actual reduction depends on the proportion and quality of the scrap used, as well as how the electricity used is generated.
The electric arc furnace is responsible for the low-carbon transition of industrial resources - namely, steel - under POSCO Group's "Triple Core" strategy, announced in July. POSCO's ultimate goal is HyREX, a hydrogen reduction ironmaking process that uses hydrogen instead of coal to produce molten iron. Construction began in April on a demonstration plant with an annual capacity of 300,000 tons, and the company plans to establish commercial technology by 2030. Until then, the electric arc furnace will serve as a bridge to reducing carbon emissions.
There are no baskets at the Gwangyang electric arc furnace, either. At a conventional electric arc furnace, scrap is loaded into a large basket, lifted by crane, and poured in from above after the furnace lid, or roof, is opened. At Gwangyang, an unmanned automated crane picks up scrap and places it in one of five hoppers. The scrap then travels along a conveyor about 100 meters long and is continuously fed into the side of the furnace. This is known as "continuous charging."
Continuous charging saves energy. Shin Jonghun, head of the electric arc furnace plant at POSCO's Electric Arc Furnace Business Task Force, explained that keeping the lid closed reduces heat loss, while hot exhaust gas that would otherwise be discarded passes over the incoming scrap and preheats it to 250-300 degrees Celsius. This reduces the electricity needed to melt the scrap by more than 10%. Keeping the lid closed also reduces the dust and noise generated when scrap is fed into the furnace.
Scrap is treated as a resource, too. Its quality varies depending on where it comes from, such as construction rebar, cans, tire cords, ships, or home appliances. Shin said that developed countries have sorting systems in place starting at the scrap-collector level, while South Korea still has room to improve. POSCO sorts scrap again at three yards inside the steelworks, then stores it by grade in 12 sections across six areas inside the plant. Once the mix is determined to meet the desired composition and price, unmanned cranes pick up the scrap in the specified order. Two articulated robots also measure the molten iron's temperature and take samples.
A continuous scrap charging system at the electric arc furnace plant of POSCO's Gwangyang Steelworks. As scrap travels along a conveyor about 100 meters long and is continuously fed into the furnace, hot exhaust gas from the furnace preheats it to 250-300 degrees Celsius, saving more than 10% in electricity. POSCO
View original imageThe molten iron produced in the electric arc furnace goes in one of two directions. It can be sent directly to the steelmaking plant, or it can undergo "blending" with molten iron produced in a blast furnace. Since it is difficult to achieve high quality by melting scrap alone, this approach combines the low-carbon characteristics of electric arc furnace molten iron with the consistent quality of blast furnace molten iron. Yang said that blending produces steel of sufficient quality to make automotive sheet steel. POSCO plans to mass-produce premium steel, including automotive sheet steel and electrical steel, using electric arc furnaces by 2030. The company has designated premium steel made in electric arc furnaces as one of its "eight strategic products" and is also running an integrated project that brings together research, production, and sales.
The remaining challenges are cost and demand. Ko said that scrap is expensive, making operating costs about 10% higher than for a blast furnace. The decision to build the electric arc furnace was based on the expectation that customers would pay a premium for steel produced with lower carbon emissions. Yang cited global Big Tech companies as an example, saying POSCO had supplied materials in response to requests from companies willing to pay more for products made with reduced carbon emissions. However, demand of this kind has not picked up as much as expected.
As a result, the Gwangyang electric arc furnace is still in the trial production stage. Yang said the company is keeping its current utilization rate at around 10% while checking various operating conditions, and that losses remain limited because production volumes are low. He explained that running the facility at full capacity under current conditions would result in losses. He added that operating the electric arc furnace could become more advantageous if carbon dioxide prices rise. A blast furnace is generally kept alight for more than 15 years once it is started, but an electric arc furnace can be adjusted to run only as much as needed by controlling the electricity and scrap feed, and can be stopped when necessary.
A view of the electric arc furnace plant at POSCO's Gwangyang Steelworks. Completed in June, it has an annual capacity of 2.5 million tons, making it the largest single facility of its kind in South Korea. POSCO
View original imageThe steel market remains challenging. Yang said that China, which accounts for around 1.1 billion tons of the world's approximately 1.8 billion tons of annual steel production, is sending its surplus overseas amid weak domestic demand, and that South Korea is the second-largest recipient after Vietnam. He explained that the key issue is not POSCO's cost competitiveness, but how much of China's oversupply reaches the market.
For electric arc furnaces to fulfill their role, affordable clean electricity and a market for low-carbon steel must both be in place. As the European Union (EU) implements the Carbon Border Adjustment Mechanism (CBAM) and customer companies demand carbon reductions across their supply chains, steel competitiveness is increasingly being judged not only on quality and price but also on carbon emissions. At an event on the "Korea Green Transformation (K-GX) Strategy" on October 7, POSCO Group emphasized the need to secure clean energy at a competitive cost and create a market that recognizes the value of low-carbon steel at a fair price.
Hot Picks Today
"Two Spend 500,000 Won in a Flash, Yet Wait Two Hours?" ... 'Dreamland' Shunned by Kids and Foreign Tourists
- The Era of Getting 200 Million Won After 30 Years Is Over... A Japanese Bank's "Perpetual Department Head" Who Just Clocked In Cries Out
- Spain Hit by Its Worst Tragedy... Lee Kangin, Moreno and Real Madrid Join Soccer World in Mourning
- They Said, “Make It Your Home for Life” - Then Suddenly Kicked 200 Passengers Off... What Happened to the Around-the-World Cruise?
- "130 Rice Bowls Sold Out in a Day"... 'Unfiltered Face' Adds 8 Million Won to Night Market Sales: China's Bungeunwoo
Shin expects the electric arc furnace to reach full capacity around 2030. He said that low-carbon steel is expected to enter large-scale production worldwide after 2028, and that POSCO aims to develop its technology ahead of that point and gain an early foothold in the market. "We hope customers for low-carbon steel will emerge soon," he said.
© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.