KRRI Verifies Structural Safety with a 30-Meter Full-Scale Bridge
Magnet-Based Automatic Connections and Smartphone Assembly Inspection Technology Applied

A technology has been developed to prefabricate the main structural components of railway bridges at a factory and assemble them at construction sites. It is expected to shorten construction periods by reducing on-site work and improve construction safety.


The Korea Railroad Research Institute (KRRI) said on November 9 that it had demonstrated its "Modular Railway Bridge Technology" on November 6 at its headquarters in Uiwang, Gyeonggi Province, before about 100 attendees, including officials from the Korea National Railway and the railway construction industry.

A load test (applying loads to measure load-bearing capacity) is being conducted on a full-scale, off-site modular railway bridge. Photo provided by the Korea Railroad Research Institute.

A load test (applying loads to measure load-bearing capacity) is being conducted on a full-scale, off-site modular railway bridge. Photo provided by the Korea Railroad Research Institute.

View original image

The technology uses an Off-Site Construction (OSC) method in which the bridge's superstructure and substructure are manufactured at a factory and then assembled on site. Whereas the main structural components of bridges were previously built directly at construction sites, the modular method involves transporting prefabricated components to the site for assembly. Because it can reduce on-site work and the space required for construction, the technology is expected to be usable for replacing bridges on railway lines while trains are in operation.


KRRI designed the system to divide the Korea National Railway's standard 45-meter KR-U girder into nine modules and its 30-meter KR-I girder into five modules. A girder is a main structural component that supports a bridge deck.


Bridge Modules Connected by Magnets...Safety Confirmed in Full-Scale 30-Meter Test


The key is "magnetically actuated modular connection technology," which connects modules quickly and accurately. The system is designed to use magnetic force to automatically extend connecting components inside the structures. This makes it possible to precisely align the connection points between modules and reduce errors and delays during assembly.


After testing a one-tenth-scale model, the research team built a 30-meter, full-scale test specimen to verify the structural performance of the joints. The team said the test confirmed that the joints provide structural safety equivalent to that of conventional monolithic bridge girders.


Prefabricated technology was also applied to the piers that support the bridge. The team developed a "socket-type elastic duct coupler" to connect the pier's foundation and column to the pier cap, which supports the superstructure at the top of the column. The coupler is designed to reduce construction errors during component connections and improve the stability of the joints.


The team also developed a technology that uses a smartphone to check in advance whether components can be assembled. By photographing the connection areas of a structure with a smartphone, users can generate a 3D image and verify that the components fit together accurately before assembly. The technology can determine within minutes whether assembly is possible without separate surveying equipment, helping reduce the need for rework at construction sites.

Modular bridge substructure (from bottom: foundation, column, and cap). Photo provided by the Korea Railroad Research Institute (KRRI).

Modular bridge substructure (from bottom: foundation, column, and cap). Photo provided by the Korea Railroad Research Institute (KRRI).

View original image

Bridges account for a large share of South Korea's railway network because of factors such as mountainous terrain. Bridge sections account for about 115 km, or 28.7%, of the Gyeongbu High-Speed Railway, and about 112 km, or 48.4%, of the Honam High-Speed Railway. The total length of bridges across the country's railway network exceeds 550 km.


KRRI believes the technology can be used not only in new railway construction but also to replace aging bridges and upgrade railway infrastructure to address climate change, including flooding. However, pilot projects to apply the technology at actual railway construction sites are planned for the future.


Kim Seong-il, a principal researcher at KRRI and the research project leader, said, "We have secured key technologies for modular railway bridges that can improve construction efficiency and safety by minimizing on-site work. We will continue to advance the manufacturing and construction processes and pursue pilot projects to apply the technology at actual railway construction sites."



KRRI President Sa Gongmyeong said, "The technology is driven by railway construction needs and can improve both productivity and safety in railway bridge construction. We will expand technical support so that it can be used in railway construction and the replacement of aging bridges."


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing