'Core Liquefaction Hub of the Barossa Gas Field': A Visit to Darwin LNG Terminal

Natural Gas Traverses 300 km Undersea Pipeline, Becomes LNG at -162 Degrees Celsius

Securing 1.3 Million Tons Annually After 14 Years of Development... Utilizing Existing Facilities

From Australia to South Korea in a Week: Establishing a Non-Middle East Supply Chain

A cylindrical storage tank, 90 meters in diameter—comparable to the length of the Statue of Liberty laid on its side—dominated the view. The tank rose to a height of 50 meters, with 220 steps reaching to its top. Thick and thin gray pipelines wove around the tank like a spider web, and beyond them, large-scale liquefaction facilities spanned the landscape. This was the Darwin Liquefied Natural Gas (LNG) terminal, located about a 50-minute drive from downtown Darwin, the northernmost city in Australia.


At 9 a.m. local time on September 30, the Darwin LNG terminal played a pivotal role: SK Innovation E&S had spent 14 years developing the Barossa gas field, and this site converts the produced natural gas into LNG.

Panoramic view of the Darwin LNG terminal in Australia. Natural gas produced from the Barossa gas field is transported here through subsea pipelines, where it undergoes liquefaction processes to produce LNG. SK Innovation

Panoramic view of the Darwin LNG terminal in Australia. Natural gas produced from the Barossa gas field is transported here through subsea pipelines, where it undergoes liquefaction processes to produce LNG. SK Innovation

View original image

The terminal covers an area of 70 hectares, equivalent to about 100 football fields. Natural gas, extracted from the Barossa gas field roughly 300 kilometers to the northwest, travels here via a subsea pipeline. Upon arrival, it undergoes impurity removal and cooling processes to be transformed into LNG, chilled to minus 162 degrees Celsius.


The first thing to catch the eye upon entering the terminal is the water storage tank. The tank exterior is decorated with images of sea creatures such as turtles, fish, and crabs, as well as Australian Aboriginal motifs. An official from Santos, the Australian operator, explained, "The artwork reflects respect for indigenous culture, local nature, and animals."


Deeper inside the facility, the operational noise from machinery grows more intense. It is especially loud around the liquefaction systems that lower the temperature of natural gas to minus 162 degrees Celsius. The equipment responsible for re-cooling the refrigerant—after it absorbs heat from the gas cooling process—is in continuous operation. Large-scale units, such as ethylene cold boxes and methane cold boxes, are lined up throughout this section.

SK Innovation E&S's LNG carrier, Prism Agility, is being loaded at the LNG terminal in Darwin, Australia. The LNG produced in Darwin is transported to demand centers, including South Korea, via the carrier. SK Innovation

SK Innovation E&S's LNG carrier, Prism Agility, is being loaded at the LNG terminal in Darwin, Australia. The LNG produced in Darwin is transported to demand centers, including South Korea, via the carrier. SK Innovation

View original image

Another striking feature is the two gas pipelines running from sea to land. One is the old pipeline that supplied natural gas from the Bayu-Undan gas field; the other connects to the newly developed Barossa gas field. For safety, the pipeline coming in from the ocean is routed underground and then comes up aboveground again within the terminal.


The natural gas arriving at the terminal undergoes processes to remove impurities and reduce its temperature, resulting in LNG production. First, impurities such as carbon dioxide (CO₂), moisture, and mercury are removed. Carbon dioxide is separated using an amine solution, followed by sequential filtration of moisture and mercury. The purified natural gas then passes through multiple cooling stages to become LNG, a liquid at minus 162 degrees Celsius.

A large LNG storage tank located at the Darwin LNG terminal in Australia. The storage capacity is approximately 200,000 m³, with an actual usable capacity of about 180,000 m³. SK Innovation

A large LNG storage tank located at the Darwin LNG terminal in Australia. The storage capacity is approximately 200,000 m³, with an actual usable capacity of about 180,000 m³. SK Innovation

View original image

In the liquefaction process, the volume of natural gas is reduced to about one-six hundredth its original size. The resulting LNG is stored in large tanks before being loaded onto carrier ships for delivery to demand centers. The LNG storage tank has a total capacity of approximately 200,000 cubic meters, with an actual usable volume of about 180,000 cubic meters.


Despite the facility's enormous scale, only about 100 people work onsite. Since key installations are automated, the terminal can be run with a relatively small staff. Drones are also used for equipment inspections.


SK Innovation E&S is able to secure approximately 1.3 million tons of LNG per year through this facility. This represents roughly 3% of South Korea’s annual LNG imports. Assuming the Barossa gas field’s projected operational period of 20 years, SK Innovation E&S will secure a total of 26 million tons of LNG. The Darwin LNG terminal is capable of liquefying around 3.7 million tons per year, and, through equity investment, SK Innovation E&S has been able to secure a long-term, stable supply of LNG for itself.

The Prism Agility, having completed loading, is departing from the Darwin LNG terminal in Australia. SK Innovation

The Prism Agility, having completed loading, is departing from the Darwin LNG terminal in Australia. SK Innovation

View original image

The LNG produced here is loaded onto ships and transported thousands of kilometers to South Korea. Notably, this route avoids the Strait of Hormuz altogether: Barossa LNG is shipped directly from northern Australia through the Pacific Ocean to South Korea. From Australia to Incheon port, shipping LNG typically takes 7–12 days—shorter than the 18–25 days from the Middle East or the 22–28 days from the United States. With growing concerns about energy supply routes due to geopolitical instability in the Middle East, Australian LNG plays a significant role in diversifying supply sources.



LNG power generation emits less greenhouse gas than coal or oil-based generation and can adjust output to match fluctuating electricity demand, thereby compensating for the intermittency of renewable energy. Another advantage is that it generally takes about 5 to 6 years from project approval to construction, allowing for relatively rapid establishment of a power supply infrastructure.


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing