Simultaneous Launch of Neonsat Cluster Satellites Nos. 2–6 for the First Time
Five More to Be Added Next Year, Establishing a Ten-Satellite System

Korea's homegrown Nuri rocket will deploy five practical cluster satellites into orbit at once next month, marking a domestic first. These satellites will gradually form a cluster system with consistent spacing over the course of about two to three months after launch, serving as the foundation for a system that observes the Korean Peninsula more than three times per day. This marks a shift for Korea’s space transport and satellite operation technology from launching a single satellite at a time to deploying and operating multiple satellites simultaneously as a cluster.


On September 15, the Korea Aerospace Administration and Korea Aerospace Research Institute (KARI) held a briefing on the satellites to be carried on the fifth Nuri rocket launch and announced the missions and preparation status of the ultra-small cluster satellites Nos. 2–6 and ten CubeSats, which are scheduled for launch on October 7.

The ultra-small satellite cluster 'NeonSat'. Five identical satellites form a cluster, maintaining a fixed interval as they carry out their mission. Provided by Korea Astronomy and Space Science Institute (KASI).

The ultra-small satellite cluster 'NeonSat'. Five identical satellites form a cluster, maintaining a fixed interval as they carry out their mission. Provided by Korea Astronomy and Space Science Institute (KASI).

View original image

The main payloads for the fifth Nuri launch are the ultra-small cluster satellites 'Neonsat' Nos. 2–6, developed by the Satellite Research Center at the Korea Advanced Institute of Science and Technology (KAIST). Five Earth observation satellites, each weighing less than 100 kilograms, will be launched simultaneously. Including the ten CubeSats serving as secondary payloads, Nuri will carry a total of 15 satellites into space on this mission.


The Neonsat cluster uses optical cameras with about 1 meter resolution in black and white and about 4 meters in color to image the Korean Peninsula and neighboring regions. They were developed for disaster and hazard monitoring and national security applications. Following this fifth launch, an additional five satellites will be deployed on the sixth launch next year, forming a ten-satellite constellation. Once all ten are operating, the target is to observe the Korean Peninsula more than three times per day.


Cluster Formation Completed 2–3 Months After Deployment


Cluster satellites do not travel physically attached to one another; instead, they maintain consistent spacing along the same orbital plane and operate as a unified system. The five satellites to be launched this time will be placed on the same orbital plane, forming a cluster with roughly 71-degrees of separation. While they will be relatively close to each other immediately after launch, each satellite will use its onboard thrusters and relative velocity to gradually increase their separation and adjust altitudes. It is expected to take about two to three months to complete the cluster formation. During the initial phase, as all five satellites orbit in close proximity, five separate ground antennas have been prepared to ensure simultaneous communication with each satellite.


Sanghyun Lee, Head of the CubeSat Constellation Project Group at the KAIST Satellite Research Center, explained, "Initially, the five satellites will be relatively close, but by using their thrusters and relative velocities, they will gradually separate and synchronize their altitudes. It is expected to take about two to three months for the five to form a cluster with consistent spacing."


The Nuri rocket also faces new technical challenges. As it must separate several main payload satellites into precise orbits in sequence, it must also ensure there are no collisions between the launch vehicle and satellites or among the satellites themselves. KARI highlighted the rocket's precision attitude control during the satellite separation process as one of the key technical elements for this launch.


The approach to satellite manufacturing has also changed. While conventional national satellites were essentially custom-built, the Neonsat production system draws on results from prototypes and verification models to streamline and automate testing procedures, applying a mass production system to repeatedly manufacture identical satellites. Parts were pre-secured based on the intention to produce multiple copies.

Sanghyun Lee, Head of the Microsatellite Constellation Project Group at the Satellite Research Center at the Korea Advanced Institute of Science and Technology (KAIST), is explaining 'NEONSAT' at a briefing on the 15th. Provided by Korea Aerospace Research Institute (KARI)

Sanghyun Lee, Head of the Microsatellite Constellation Project Group at the Satellite Research Center at the Korea Advanced Institute of Science and Technology (KAIST), is explaining 'NEONSAT' at a briefing on the 15th. Provided by Korea Aerospace Research Institute (KARI)

View original image

Lee added, "Previously, manufacturing a single satellite would take two to three years, but in mass production it takes about two months to produce one. By optimizing and automating the testing process and establishing a robust parts procurement system, we have significantly shortened the production period."


Accumulating Repetition is More Important Than a Single Success


This launch serves as a stage for domestic satellite developers to apply their real-world space experience to new satellites. For example, Quaternion, which will launch the CubeSat 'PERSAT02', previously placed PERSAT01 on the fourth Nuri flight last year but encountered difficulties during initial communication.


Kyusik Ham, Director at Quaternion, said, "During the fourth launch, it took us about nine days in the initial phase just to locate the satellite, and consequently we were unable to capture the intended marine debris images around Jeju Island. This time, we've established connections with several ground stations and designed the receiving module with a backup system to ensure we succeed from the initial contact through the main mission." He added, "By accumulating and sharing this experience, we've prepared thoroughly to do even better this time."


Other CubeSats included in the fifth Nuri launch are: 'BEE-1012' from Space LiinTech, which manufactures pharmaceutical crystals in orbit; 'CPSat' from Chosun University, for testing satellite laser communication; and 'SLEDGE-1' from O&V Space, which measures atmospheric data using GPS signals, among others, for a total of ten CubeSats.



The fifth Nuri launch is scheduled for October 7 at the Naro Space Center. The projected launch window is between 12:23 p.m. and 1:23 p.m. on the day. The final launch time will be determined after considering weather conditions, the potential for collision with space objects, and the readiness of the launch vehicle.


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing