UNIST and Seoul National University:
Structural Reorganization of Platinum Depending on Support Crystal Facets
Activation Energy Reduced by Up to 25.6%

It has been revealed by a domestic research team that catalysts, which are known to facilitate chemical reactions without themselves changing, actually undergo structural changes during the reaction process, altering their performance as well. The study found that structural changes in platinum particles depend on the crystal plane on which they are placed, and for certain crystal planes, the energy required after a reaction was reduced by as much as 25.6%.


On September 7, UNIST (Ulsan National Institute of Science and Technology) announced that Professor Gwangjin Ahn's research team from the Department of Energy and Chemical Engineering and Professor Jungwoo Han's team from the Department of Materials Science and Engineering at Seoul National University have revealed that the crystal facet of the support on which platinum (Pt) is deposited determines both the shape of the platinum particles and the catalytic performance before and after a reaction.

Schematic diagram of the structural changes of platinum nanoparticles depending on the titanium oxide crystal plane. On the (001) plane, the contact between platinum and titanium oxide broadens after the reaction, enhancing oxygen activation and catalytic reactivity, whereas on the (101) plane, platinum particles maintain a relatively independent structure. Provided by the research team.

Schematic diagram of the structural changes of platinum nanoparticles depending on the titanium oxide crystal plane. On the (001) plane, the contact between platinum and titanium oxide broadens after the reaction, enhancing oxygen activation and catalytic reactivity, whereas on the (101) plane, platinum particles maintain a relatively independent structure. Provided by the research team.

View original image

Platinum is a representative catalyst used in various chemical reactions, ranging from automotive exhaust gas purification to hydrogen fuel cells. Because of its high cost as a precious metal, it is fabricated into nanoparticles and dispersed on supports such as titanium dioxide (TiO₂) for use.


The research team analyzed the reaction that transforms carbon monoxide (CO) into carbon dioxide (CO₂). As a result, it was found that on the (001) crystal plane of titanium dioxide, platinum spread out widely like a droplet, making broad contact with the support. Although the surface structure of the platinum changed as the reaction started, the wide contact area was maintained, and after the initial reaction, the activation energy dropped by 22.7% to 25.6% compared to the initial value. Lower activation energy makes chemical reactions occur more easily.


In contrast, on the (101) crystal plane, platinum agglomerated like a sphere, resulting in a much smaller contact area with the support. After the reaction, the atomic arrangement was rearranged into a more ordered and angular form, and even after repeated reactions, the activation energy remained almost unchanged.


Designing Catalysts Beyond Their 'Initial State' to Changes 'During Operation'


The research team used electron microscopy and X-ray absorption spectroscopy to track the structure of platinum nanoparticles and the atomic bonding state before and after the reactions. Simulations confirmed that platinum on the (001) plane formed a stable, broad contact with the support, lowering the energy barrier required for the reaction.

Research team photo. (From the left) Professor Kwangjin Ahn from UNIST, Professor Jungwoo Han from Seoul National University, Senior Researcher Shinmyeong Yoon from Korea Research Institute of Chemical Technology, Researcher Jihoon Kim from UNIST, Researcher Yunkyung Kim from Seoul National University. Provided by UNIST

Research team photo. (From the left) Professor Kwangjin Ahn from UNIST, Professor Jungwoo Han from Seoul National University, Senior Researcher Shinmyeong Yoon from Korea Research Institute of Chemical Technology, Researcher Jihoon Kim from UNIST, Researcher Yunkyung Kim from Seoul National University. Provided by UNIST

View original image

This study presents a new principle for catalyst design that considers not only the initial structure of the catalyst but also how its structure changes during actual operation. By leveraging this principle, the research team expects it will be possible to develop catalysts with enhanced reactivity and durability while reducing the amount of costly platinum required.


Professor Ahn stated, "Catalysts have been known as substances that do not change during reactions, but in fact, while they are not consumed, their shape and structure can change throughout the process. Our work proposes a new design direction that takes into account the structural changes of catalysts during reactions."



The results of this study were published online in the international journal Nature Communications on August 8.


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing