Ultra-High Precision Measurement at 0.026 mm for One-Fortieth the Cost of Existing Equipment
AI and Edge Computing Enable Real-Time Risk Assessment
Anticipated to Revolutionize Safety Management for Small- and Medium-Sized Facilities

An ultra-low-cost, high-precision displacement sensor has been developed, capable of detecting minute movements in bridges and buildings at a level of 0.026 mm, while costing only one-fortieth of existing equipment. This technology enables real-time monitoring of collapse risks in aging bridges and buildings, as well as other small- and medium-sized social infrastructure, and is expected to eliminate blind spots in facility safety management.


On June 2, the Ministry of Science and ICT and the National Research Foundation of Korea announced that Professor Son Hoon of the Department of Civil and Environmental Engineering at the Korea Advanced Institute of Science and Technology (KAIST) (photo) has been selected as the recipient of the June Korea Science and Technology Award.

Preventing Bridge Collapse Risks with a 1 Million Won Sensor... KAIST Professor Son Hoon Wins Korea Science and Technology Award View original image

Professor Son was recognized for his achievement in developing an affordable, high-precision displacement sensor for real-time disaster and hazard alerts in small- and medium-sized social infrastructure.


As the aging of social infrastructure such as bridges, tunnels, and buildings accelerates, the importance of 'structural health monitoring' for real-time surveillance of safety conditions is increasing. However, more than 98% of infrastructure worldwide consists of small- and medium-sized structures, whose displacements are only a few millimeters, requiring high-precision monitoring. The cost of existing equipment, which exceeds 40 million won per unit, has made continuous management difficult.


Professor Son's research team addressed this issue by developing a multi-physical quantity simultaneous measurement technology that combines millimeter-wave (mmWave) radar with microelectromechanical systems (MEMS) accelerometers.


Millimeter-wave radar excels at measuring slow displacements in structures but may miss rapid vibrations, while MEMS accelerometers are strong in measuring fast vibrations but have limitations in long-term displacement measurement. The research team combined the strengths of both sensors and applied a signal processing algorithm, enabling a single sensor to simultaneously measure acceleration, tilt, and displacement.


The developed sensor reduced production costs to less than 1 million won, while achieving ultra-high precision measurement performance at the 0.026 mm level. Power consumption was also reduced to 131 mWh, which is one-hundredth that of existing equipment. In addition, energy harvesting technology was applied so that the sensor can be used without an external power supply, and edge computing functionality was built in to allow the sensor to assess collapse risks autonomously and send real-time alerts.

Professor Son Hoon has developed an affordable high-precision displacement sensor that can detect minute movements in small to medium-sized social infrastructure such as aging bridges and buildings in real time. By combining millimeter-wave radar and an accelerometer, it can measure structural displacement with world-class accuracy, and it is regarded as a technology that significantly reduces costs compared to existing expensive equipment, thereby addressing blind spots in facility safety management. Provided by the Ministry of Science and ICT

Professor Son Hoon has developed an affordable high-precision displacement sensor that can detect minute movements in small to medium-sized social infrastructure such as aging bridges and buildings in real time. By combining millimeter-wave radar and an accelerometer, it can measure structural displacement with world-class accuracy, and it is regarded as a technology that significantly reduces costs compared to existing expensive equipment, thereby addressing blind spots in facility safety management. Provided by the Ministry of Science and ICT

View original image

This technology has been validated for reliability at more than 13 domestic and overseas sites, including the parking structure at Stanford University and the San Jose freeway in the United States, the Weifang bridge in China, and the Geumgang pedestrian bridge in Sejong City.


This achievement is evaluated as a case in which source technology developed through support from the Ministry of Science and ICT's basic research initiatives, including the Leader Research Program and the Basic Research Laboratory (BRL), has led to actual technology transfer and commercialization. The research results were published in 2023 in the international journal 'Mechanical Systems and Signal Processing.'


Professor Son is an expert in the field of structural safety diagnostics and was selected as the youngest tenured professor at KAIST in his early 40s. He currently serves as head of the Rail Infrastructure Innovation AX Research Team, and for the past two years has also served as director of the National Railroad Corporation's Institute for Railroad Innovation, participating in the establishment of advanced technology-based facility safety management systems.



Professor Son stated, "This research is significant in that it provides a technological foundation for the precise management of small- and medium-sized facilities that have been excluded from continuous monitoring. Going forward, I will continue research on AI-based digital twins to build automated, unmanned, and intelligent safety diagnostic systems, thereby contributing to public safety and disaster prevention."


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing