Automatic Power Path Adjustment Based on Load

Reduced Power Loss and Heat Generation Achieved

Potential Applications in Pacemakers and Neurostimulators

Wireless Power Transfer Efficiency Reaches 94%

A team of Korean researchers has developed a semiconductor chip technology that improves the wireless charging efficiency of implantable medical devices. By altering the energy transfer path according to the power consumption of the device's internal circuits, this technology reduces both power loss and heat generation during the charging process. It is expected to ease the burden of battery replacement surgeries for devices such as pacemakers and neurostimulators in the future.


On May 27, Ulsan National Institute of Science and Technology (UNIST) announced that Professor Byungjae Byeon and his research team in the Department of Electrical and Electronic Engineering have developed a high-efficiency wireless power transfer (WPT) semiconductor chip that automatically adjusts the power transmission structure based on the load conditions of implantable medical devices.

Wireless power transfer system structure for implantable medical devices. Power transmitted from the transmission coil passes through the receiving coil into the device, and the system automatically connects different matching circuits according to high-load or low-load conditions to improve power transfer efficiency. In addition, a switch control technology was applied in the active rectifier circuit to reduce power loss during the conversion of alternating current power to direct current power. This allows stable wireless charging efficiency to be maintained according to load changes. Provided by the research team

Wireless power transfer system structure for implantable medical devices. Power transmitted from the transmission coil passes through the receiving coil into the device, and the system automatically connects different matching circuits according to high-load or low-load conditions to improve power transfer efficiency. In addition, a switch control technology was applied in the active rectifier circuit to reduce power loss during the conversion of alternating current power to direct current power. This allows stable wireless charging efficiency to be maintained according to load changes. Provided by the research team

View original image

Implantable medical devices include both high-load circuits that require large currents, such as for nerve stimulation, and low-load circuits that use only small currents, such as for data processing. The problem is that the optimal conditions for efficient power transfer change depending on the varying circuit load.


Conventional wireless charging technology supplies power under a single fixed condition, resulting in energy loss depending on the device’s operational status. The heat generated during this process can increase the risk of damage to surrounding tissue or trigger foreign body reactions.


The research team addressed this by implementing a method that connects different “dedicated matching networks” depending on the load conditions.


The matching network is a circuit that adjusts the power transmitted from the transmitting coil so that it efficiently enters the device through the receiving coil. The team designed the chip so that internal electronic switches automatically connect the high-current matching network under high-load conditions and the low-current matching network under low-load conditions.

Wireless power transfer semiconductor chip for implantable medical devices developed by the research team. The chip on the top is the entire wireless charging system that switches the matching circuit and distributes power according to high-load and low-load conditions, while the chip on the bottom was manufactured to separately verify the power conversion efficiency of the active rectifier that converts alternating current power to direct current. Provided by the research team

Wireless power transfer semiconductor chip for implantable medical devices developed by the research team. The chip on the top is the entire wireless charging system that switches the matching circuit and distributes power according to high-load and low-load conditions, while the chip on the bottom was manufactured to separately verify the power conversion efficiency of the active rectifier that converts alternating current power to direct current. Provided by the research team

View original image

"Reduced Power Loss and Heat Generation"... Enhanced Safety for Implantable Medical Devices Expected


The team also improved the efficiency of the rectifier circuit that converts alternating current (AC) power into the direct current (DC) power used by the actual device.


Because the power delivered from outside the body is in AC form, it must be converted to DC inside the medical device. The researchers minimized power loss in this conversion process by applying SOOC (Slowdown Unit Cell Based On/Off Controller) and ETS (Early Turn-on Switching) technologies, which precisely control the timing of the switching operations.

Photo of the research team. Professor Byungjae Byun (left) and researcher Sungmin Shin. Courtesy of UNIST

Photo of the research team. Professor Byungjae Byun (left) and researcher Sungmin Shin. Courtesy of UNIST

View original image

Experimental results showed that the link efficiency of power transfer from the transmitting coil to the receiving coil reached 94.4% under low-load conditions (3mA) and 92.7% under high-load conditions (30mA). The power conversion efficiency (PCE) of the active rectifier converting AC to DC reached up to 94.5%.


Additionally, stable efficiency above 92.3% was maintained even when the input voltage varied within the range of 2.5 to 5.0V.


The team expects this technology will contribute to enhancing the reliability and operational duration of implantable medical devices intended for long-term use. They also noted a high potential for applications in other low-power electronics, such as wearable devices and ultra-compact Internet of Things (IoT) devices.



This research was supported by the Ministry of Science and ICT and the Institute of Information & Communications Technology Planning & Evaluation (IITP), and the results were published in the international journal ‘IEEE Transactions on Very Large Scale Integration Systems’ in the field of semiconductor circuits and systems.


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing