GIST Develops High-Efficiency, Low-Cost Electrode for Next-Generation Green Hydrogen Production
Design of a Non-Precious Metal Porous Electrode Integrating Catalytic and Mass Transport Functions
A research team at Gwangju Institute of Science and Technology (GIST) has developed an integrated non-precious metal porous electrode that can enhance both the efficiency and durability of next-generation green hydrogen production. This advancement improves the prospects for the commercialization of high-efficiency, low-cost water electrolysis technology.
(From left) Professor Jonghoon Joo of the Department of Environmental and Energy Engineering at GIST, Dr. Hyeri Kim (Researcher at Aekyung Chemical Central Research Institute), Dr. Sungjun Kim of the Korea Research Institute of Chemical Technology, Researcher Sanghoon Shin, Professor Jangyong Lee of the Department of Chemical Engineering at Konkuk University. Provided by GIST
View original imageOn May 26, GIST announced that the research team led by Professor Jonghoon Joo of the Department of Environmental and Energy Engineering, in collaboration with Professor Jangyong Lee’s team from Konkuk University and Dr. Sungjoon Kim’s team from the Korea Research Institute of Chemical Technology, has developed an “integrated non-precious metal porous electrode” that can improve the performance and durability of devices for next-generation green hydrogen production.
The electrode developed in this study features an integrated structure that combines the catalytic function responsible for the oxygen evolution reaction during hydrogen production and the transport function that facilitates water and gas movement. By doing so, the team reduced internal electrical resistance within the electrode, enabled smooth water supply and oxygen release, and achieved both high hydrogen production efficiency and long-term stability even under high current conditions.
Recently, “green hydrogen” has been attracting attention as a core technology for achieving carbon neutrality. Green hydrogen is an eco-friendly hydrogen produced by splitting water with electricity, generating no carbon emissions in the process. In particular, anion exchange membrane water electrolysis (AEMWE) is recognized as a next-generation hydrogen production technology because it can use inexpensive metal catalysts such as nickel (Ni) and iron (Fe) instead of costly platinum group precious metals. However, conventional electrodes are built by stacking multiple layers, which creates electrical resistance and has limitations such as catalyst layer delamination or insufficient water and oxygen transport during long-term operation.
To address these issues, the research team newly designed a nickel-iron alloy-based porous electrode (NiFe-f-PTL). This electrode’s porous structure, with its fine holes, simultaneously serves as both the catalyst and transport layer. As a result, it reduces electrical losses between the electrode and membrane without the need for a separate catalyst layer or ionomer, as required in conventional electrodes, and improves the supply of water and discharge of oxygen bubbles. Furthermore, the structural stability of the electrode was enhanced, minimizing performance degradation even after prolonged use.
The team fabricated the electrode using a relatively simple “tape casting” process. Metal powders were formed into thin sheets and then heat-treated to create a porous, sponge-like structure with numerous fine holes. This method allows for uniform control of electrode thickness and pore structure, providing advantages for large-area and mass production in the future.
Schematic comparison between the conventional electrode structure and the integrated porous nickel-iron based electrode developed in this study. Provided by GIST
View original imageThe team validated the performance of the new electrode in an actual anion exchange membrane water electrolysis cell. They confirmed that a large amount of hydrogen could be produced stably even under high temperatures and strong alkaline conditions. Under test conditions simulating real device operation—80 degrees Celsius and 1.0 molar (M) potassium hydroxide (KOH)—the electrode achieved a high current density of 6.73 amperes (A/cm²) at 1.8 volts (V). In a continuous operation test, the same electrode maintained stable structure and performance for a total of 2,142 hours without replacement. Through these results, the team demonstrated that the new electrode maintains high durability and stable operation over extended periods even in alkaline environments.
Professor Jonghoon Joo stated, “This study shows that to improve the performance of actual water electrolysis devices, it is essential to consider not only the catalytic performance of the electrode but also the processes of water and gas transport and the contact structure between the membrane and electrode during the design stage. The integrated porous electrode can serve as a core technology for next-generation green hydrogen production systems that are both highly efficient and long-lasting.”
Hot Picks Today
"Two Spend 500,000 Won in a Flash, Yet Wait Two Hours?" ... 'Dreamland' Shunned by Kids and Foreign Tourists
- The Era of Getting 200 Million Won After 30 Years Is Over... A Japanese Bank's "Perpetual Department Head" Who Just Clocked In Cries Out
- Spain Hit by Its Worst Tragedy... Lee Kangin, Moreno and Real Madrid Join Soccer World in Mourning
- They Said, “Make It Your Home for Life” - Then Suddenly Kicked 200 Passengers Off... What Happened to the Around-the-World Cruise?
- "130 Rice Bowls Sold Out in a Day"... 'Unfiltered Face' Adds 8 Million Won to Night Market Sales: China's Bungeunwoo
This research was led by Professor Jonghoon Joo of GIST, Professor Jangyong Lee of Konkuk University, and Dr. Sungjoon Kim of the Korea Research Institute of Chemical Technology, with Dr. Hyeri Kim of GIST and Researcher Sanghoon Shin of the Korea Research Institute of Chemical Technology as co-first authors. The study was supported by the Leading Research Center Program and the Nano and Material Technology Development Program of the Ministry of Science and ICT and the National Research Foundation of Korea. The results were published online in the international journal ‘Nature Communications’ on May 13, 2026.
© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.