"One Every 60 Seconds"... UNIST Achieves Ultra-Fast Micro 3D Printing [Reading Science]
Volumetric Printing with Droplets Enables 100x Speed Increase
Continuous Production of 10 Structures in 10 Minutes
A domestic research team has developed an ultra-fast 3D printing technology capable of producing three-dimensional microstructures every 60 seconds. This advancement is seen as opening the door to the high-volume on-demand production of customized parts by surpassing the speed limitations of conventional layer-by-layer additive manufacturing methods.
On April 29, Ulsan National Institute of Science and Technology (UNIST) announced that the research team led by Professor Jeong Imdu from the Department of Mechanical Engineering has developed "Dispensing Volumetric Additive Manufacturing (DVAM)" technology, which enables the fabrication of structures inside droplets in a single step. The research results were published online on March 21 in the international journal Advanced Functional Materials, specializing in materials science.
Integrated schematic of high-speed sequential printing technology for droplet rotating volumetric additive manufacturing. a. Volumetric printing principle selectively curing only specific internal positions by irradiating light at multiple angles on a rotating liquid droplet. b. Device configuration that forms and rotates droplets using a syringe and pipette while observing shapes with a camera. c. Continuous manufacturing process where structures are formed inside the droplet, the completed structure is ejected, and the next droplet follows. Provided by the research team
View original image"No Layer-by-Layer Stacking" ... 3D Printing by Curing the Entire Volume
Conventional 3D printing builds structures by stacking material one layer at a time, resulting in a significant increase in manufacturing time for more complex designs. In contrast, this new technology applies a volumetric printing method, which cures the entire liquid resin droplet at once by irradiating it with light.
In particular, the research team implemented a structure that simultaneously performs printing and ejection within a single resin droplet suspended at the tip of a glass pipette, without the need for a separate container. Once printing is complete, the structure immediately drops onto the substrate, and a new droplet is supplied right away, enabling continuous production.
With this method, it takes approximately 60 seconds to create a single structure. The research team succeeded in continuously manufacturing 10 different three-dimensional structures, such as an Eiffel Tower and sculptures, within 10 minutes.
AI-Corrected Light Refraction ... Achieving Both Speed and Precision
The main technical challenge was correcting the refraction of light caused by the curved surface of the droplet. To solve this, the research team combined artificial intelligence (AI) with inverse ray tracing calculations.
Photo of the research team. Professor Jeong Imdu (left) and Researcher Jeon Hongryeong. Courtesy of UNIST
View original imageThe deep learning-based object recognition system analyzes the shape of the droplet in real time, while the system calculates the light path and projects a pattern to correct for distortion. This enabled high precision without the need for additional refractive index correction solutions.
Jeon Hongryeong, the first author and researcher, explained, "We confirmed the possibility of continuously producing micro-components of different shapes at a speed more than 100 times faster than conventional methods."
Hot Picks Today
"Two Spend 500,000 Won in a Flash, Yet Wait Two Hours?" ... 'Dreamland' Shunned by Kids and Foreign Tourists
- The Era of Getting 200 Million Won After 30 Years Is Over... A Japanese Bank's "Perpetual Department Head" Who Just Clocked In Cries Out
- Spain Hit by Its Worst Tragedy... Lee Kangin, Moreno and Real Madrid Join Soccer World in Mourning
- They Said, “Make It Your Home for Life” - Then Suddenly Kicked 200 Passengers Off... What Happened to the Around-the-World Cruise?
- "130 Rice Bowls Sold Out in a Day"... 'Unfiltered Face' Adds 8 Million Won to Night Market Sales: China's Bungeunwoo
Professor Jeong Imdu stated, "This is a fundamental breakthrough in overcoming the slow speed that has been the greatest weakness of 3D printing," adding, "We are now entering an era where it is possible to manufacture desired shapes on demand, within just a few dozen seconds."
© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.