Stable Metal Anode Operates in Normal Atmosphere
Lower Production Costs Raise Expectations for Next-Generation EV and ESS Batteries

The commercialization of magnesium batteries—considered next-generation batteries capable of overcoming the resource and safety limitations of lithium-ion batteries—has moved one step closer. The Korea Institute of Science and Technology (KIST) has successfully developed a magnesium metal anode that operates stably even under normal atmospheric conditions using a simple 15-minute dipping process, significantly lowering the barrier posed by demanding dry manufacturing processes.


On April 9, the Korea Institute of Science and Technology announced that the research team led by Dr. Oh Sihyung at the KIST Energy Storage Research Center has developed an "atmosphere-stable magnesium metal anode" by immersing magnesium metal in a special solution for 15 minutes.

Schematic diagram of the protective layer formation process on magnesium anodes through a simple dipping process and the structure of the protective layer containing functional materials that physically and chemically capture and remove moisture. Provided by the research team

Schematic diagram of the protective layer formation process on magnesium anodes through a simple dipping process and the structure of the protective layer containing functional materials that physically and chemically capture and remove moisture. Provided by the research team

View original image

Magnesium has attracted attention as a next-generation material for electric vehicle batteries and energy storage systems (ESS) due to its abundance in seawater and domestic resources, low cost, high volumetric energy density, and chemical stability. However, even trace amounts of moisture can form a film on the electrode surface, halting electrochemical reactions—a critical limitation that has until now required costly drying facilities and strict moisture-blocking processes.


The research team shifted their approach: instead of completely blocking moisture, they developed a method to actively remove incoming moisture. By immersing magnesium metal in a trimethyl phosphate (TMP) solution for 15 minutes, a nano-scale protective layer forms on the surface. This layer proactively addresses moisture before it reaches the electrode surface by either chemically decomposing it or physically trapping it.


In practice, the developed electrode maintained stable charge and discharge cycles even in highly humid electrolyte environments exceeding 6,500 ppm, and retained performance for over 1,200 hours in conditions of 1,050 ppm. Notably, batteries assembled in regular atmospheric conditions—without specialized sealed equipment to completely block moisture and oxygen—also functioned properly, demonstrating the method’s potential for real-world manufacturing applications.


Proven Potential for Mass Production Without Complex Dry Processing


This achievement is significant because it simplifies the manufacturing process, which has been the biggest hurdle for magnesium batteries. If batteries can be assembled in the open air, production costs can be greatly reduced, and the simple dipping method is easily scalable to mass production lines. The breakthrough is also expected to have a spillover effect into other metal battery fields sensitive to moisture.


Dr. Oh Sihyung of the KIST Energy Storage Research Center commented, "This is a case of overcoming a key barrier to commercialization by shifting from a conventional passive moisture-blocking method to an active moisture-control concept. It will greatly accelerate both magnesium battery research and the spread of mass production technologies."



The results of this research were published in the latest issue of the international journal 'Nature Communications'.


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing