Problems Found in Joint Retaining Wall

Construction Company Discusses Solutions

On April 7, Cheoin-gu in Yongin Special City (Mayor Lee Sangil) conducted an on-site inspection of the Yongin Techno Valley General Industrial Complex.

Cheoin District of Yongin Special City inspected the green retaining wall in the Yongin Techno Valley General Industrial Complex on the 7th. Provided by Yongin City

Cheoin District of Yongin Special City inspected the green retaining wall in the Yongin Techno Valley General Industrial Complex on the 7th. Provided by Yongin City

View original image

This inspection was carried out in response to reports that defects had been found in the retaining wall within the industrial complex's green area.


On the day of the inspection, city officials, representatives from the construction company, and personnel from the precision safety inspection service thoroughly checked the following: the deformation and cracks in the structure, safety measures at the site and its surroundings, causes of the defects, and future action plans. They also discussed solutions to address the issues.


The retaining wall where issues were found is a joint retaining wall classified as a 'Type 2 facility' (a retaining wall with a combined exposed height of 5 meters or more from the ground and a total length of at least 100 meters).


The inspection revealed that, during the ongoing precision safety inspection, the wall had a planned linear deviation (overturning/tilt) exceeding 4%. Its safety rating is expected to be designated as either 'Grade D (insufficient)' or 'Grade E (poor).'



A district official stated, "We have determined that a precise analysis is necessary for the retaining wall where defects were identified, so we plan to conduct a precision safety diagnosis. Based on the results, we will promptly address any issues that require repair or reinforcement."


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing