Establishment of "Recommended Outdoor Electronic Billboard Brightness Standards"

Daytime Brightness Set at 7,000 cd/㎡ or Less Based on Survey Data

Separate Standards for Medium and Large Billboards... Adjusted from Current Legal Limits

Seoul Metropolitan Government has become the first in the nation to establish "recommended brightness standards" for electronic billboards, adjusting brightness levels based on billboard size and time of day. This move comes as large LED billboards have rapidly increased throughout Seoul, resulting in a surge of complaints from pedestrians and drivers about excessive brightness.


According to Seoul Metropolitan Government on March 31, new "Recommended Day and Night Brightness Standards for Outdoor Electronic Billboards" have been established, including a daytime brightness limit of 7,000 cd/㎡ or less.

Brightness measurement site of electronic billboards in Seoul city. Seoul City

Brightness measurement site of electronic billboards in Seoul city. Seoul City

View original image

To ensure objectivity and practical applicability, Seoul Metropolitan Government conducted actual brightness measurements of 52 major billboards throughout the city between January and March, both during the day and at night. The survey found a wide range of daytime brightness levels, from 1,448 to 14,000 cd/㎡, with a median value of about 7,058 cd/㎡. Based on this, the recommended daytime brightness for billboards was set at 7,000 cd/㎡ (candela per square meter) or less.


At night, billboard brightness was measured at 100 to 1,500 cd/㎡, with a median value of about 400 cd/㎡.


In particular, for nighttime, the standards are divided into "medium-sized" billboards (225㎡ or less) and "large-sized" billboards (over 225㎡). For medium-sized billboards, the recommended brightness is 500 cd/㎡ or less from 60 minutes after sunset until midnight, and 400 cd/㎡ or less after midnight. For large-sized billboards, the limits are set at 400 cd/㎡ or less before midnight, and 350 cd/㎡ or less afterward. These figures are up to one-third of the current legal maximum (1,500 cd/㎡). Both citizens' discomfort from glare and nighttime driving safety were taken into consideration.


The content operation guidelines were also updated to reduce visual fatigue perceived by citizens. For still images, the use of high-brightness white, which causes eye fatigue, should be minimized, and low-brightness-based screen compositions are recommended. When transitioning between screens, a gradual change in brightness should be applied instead of abrupt shifts in contrast.


Elements that can cause visual fatigue, such as repeated blinking or excessive flashing, are to be minimized. The city stated that these new brightness standards are expected to not only improve citizen comfort and urban landscapes but also achieve an energy saving effect of approximately 15%.


To ensure the effectiveness of the billboard brightness standards, Seoul Metropolitan Government also plans to promote the adoption of "automatic brightness adjustment devices" that automatically regulate luminance in response to ambient light. In designated outdoor advertising free zones, installation of automatic brightness adjustment devices based on light sensors will be mandatory. The recommended standards will apply to all electronic billboards over 30㎡, starting from April 1.



Choi In-kyu, Director of Design Policy, stated, "These standards do not impose a blanket regulation on billboard brightness, but rather provide a rational improvement by adjusting excessive brightness, taking into account both advertising readability and citizens' visual fatigue, as well as enhancing energy efficiency."


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing