KRICT Achieves zT 0.927 with Silver Selenide-Based Material
Potential for Data Center and Wearable Device Power Applications

A high-density thermoelectric material with commercial-grade performance has been developed, capable of converting industrial waste heat into electricity without the need for high-temperature or high-pressure processes. Its wide range of applications—from data center thermal management to powering wearable healthcare sensors—has made it a promising next-generation energy recovery technology.


The Korea Research Institute of Chemical Technology announced on March 30 that Dr. Kang Younghoon's research team has developed an environmentally friendly, high-performance thermoelectric material based on silver selenide (Ag₂Se), which can be manufactured at a relatively low temperature of about 350°C under atmospheric pressure conditions.

Eco-friendly and economical 'Silver Selenide (Ag2Se1.2) Thermoelectric Material' Low-Temperature and Ambient-Pressure Mass Production Technology. Courtesy of the research team

Eco-friendly and economical 'Silver Selenide (Ag2Se1.2) Thermoelectric Material' Low-Temperature and Ambient-Pressure Mass Production Technology. Courtesy of the research team

View original image

Thermoelectric materials are used to mutually convert heat and electricity, and are considered a core technology in electronic device cooling and industrial waste heat power generation. Currently, the most widely commercialized materials are in the bismuth telluride (Bi₂Te₃) family, but their use of rare elements, high manufacturing costs, and toxicity issues have been cited as significant limitations.


The research team synthesized silver selenide nanoparticles using an aqueous process and designed a new composition (Ag₂Se₁.₂) by adding selenium. During the heat treatment, the selenium turns into a liquid at low temperatures, filling the gaps between the particles and forming a dense structure. This approach mimics the principle of liquid-phase sintering, but is implemented at low temperature and atmospheric pressure.

Application Cases of Thermoelectric Materials. Provided by Research Team

Application Cases of Thermoelectric Materials. Provided by Research Team

View original image

This structure increases electrical conductivity while reducing thermal conductivity, thereby maximizing power generation efficiency. In fact, the developed n-type material recorded a thermoelectric figure of merit (zT) of 0.927 at 393K (about 120°C), approaching the level of existing commercial n-type materials, which is 1.0.


The mechanical strength has also been greatly improved. Both compressive strength and elastic modulus were more than twice as high as previous materials, increasing the potential for manufacturing thermoelectric modules with complex structures and customized products.

Commercial-Grade Thermoelectric Material Converts Waste Heat to Electricity at 350°C and Atmospheric Pressure [Reading Science] View original image

Notably, a high-density structure was achieved with heat treatment at just 350°C, without the need for high-temperature processes up to 1000°C or high-pressure sintering equipment at several hundred megapascals (MPa), leading to expected simplification of the process and reduction of manufacturing costs.


This technology can be applied to small-scale power generation systems that recover waste heat from factories, vehicle exhaust, data centers, and solar power systems and convert it into electricity. In the long term, it also holds significant potential as an auxiliary power source for wearable IoT devices and healthcare sensors.



The research findings were published in the January issue of the international materials science journal Advanced Composites and Hybrid Materials.


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing