A Premium Bed Strategy Amid Economic Downturn
Strengthening Market Position Through Commitment to Quality Management

"Watch closely to see if the bowling pins fall when the bowling ball is dropped."


On March 25, a company representative offered this tip in front of the vanadium pocket spring drop impact tester at the Simmons Icheon Factoreum Sleep Research R&D Center in Gyeonggi Province. Using this device, Simmons drops a bowling ball from a height of about 1 meter and checks whether the bowling pins placed right next to the drop point remain standing. The tester measures the rebound height of the bowling ball and the oscillation of the spring using sensors during this process.

The drop impact test device at the Simmons Sleep Research R&D Center measures spring oscillation and vibration by dropping a bowling ball onto a spring. On the right is Simmons' vanadium pocket spring. Photo by Jinju Han

The drop impact test device at the Simmons Sleep Research R&D Center measures spring oscillation and vibration by dropping a bowling ball onto a spring. On the right is Simmons' vanadium pocket spring. Photo by Jinju Han

View original image

The vanadium spring is made by adding vanadium to POSCO's high-strength steel wire and has been applied to Simmons mattresses since July 2024. This spring is wrapped in nonwoven fabric from Italy’s Italpetro before being incorporated into the mattress. As seen in Simmons' classic advertisement with the concept of "unshakable comfort," the three bowling pins placed right next to the impact point remained standing. In contrast, in the adjacent test using a competitor's spring, all three bowling pins toppled as soon as the bowling ball was dropped.


Nearby, a 140 kg roller was rolling over a mattress to test the degree of fabric damage and wrinkling of the internal materials. The tester displayed “1,214 cycles.” The frame durability tester was opening and closing the frame drawer at a rate of 12 times per minute, exceeding 5,000 cycles. A Simmons representative explained, "Vanadium springs undergo 200,000 tests and can withstand more than 10 million compression cycles," adding, "Other products on the market tend to break and pierce the internal materials after more than 100,000 tests."


Simmons also researches how temperature and humidity affect sleep by measuring mattress warmth and comfort using a thermal mannequin. The mannequin is equipped with 33 sensors, allowing it to measure body temperature at different parts of the body. Through this, Simmons is developing optimal fabric and internal material combinations for enhanced comfort. There is also a "sleep state analysis room" where participants are regularly recruited to measure sleep satisfaction through brain wave analysis over two to three weeks.


Simmons conducts rolling tests at its Sleep Research R&D Center using rollers weighing up to 140 kg to measure mattress fabric wear, internal material deformation, and spring bending. Photo by Jinju Han

Simmons conducts rolling tests at its Sleep Research R&D Center using rollers weighing up to 140 kg to measure mattress fabric wear, internal material deformation, and spring bending. Photo by Jinju Han

View original image
Springs used in Simmons bed mattresses. Photo by Jinju Han

Springs used in Simmons bed mattresses. Photo by Jinju Han

View original image

The Sleep Research R&D Center is a space that epitomizes Simmons’ top priority of "quality management" and serves as the heart of the company. Including this center, the Simmons Factoreum was constructed in 2017 as the largest facility in the industry, and all Simmons products are manufactured and shipped from here. It functions as a one-stop hub for product manufacturing, quality testing, inspection, and delivery.


Simmons opens its production building to the public so consumers can directly observe how and under what conditions mattresses are made, and engraves the names of both the manufacturer and the final inspector on the mattress label to ensure the integrity of the process. Approximately 600 to 700 mattresses are produced daily in the production building, which is equipped with a clean production system free of wastewater and contaminants, giving an impression of cleanliness that surpasses that of a typical office. This reflects CEO Ahn Jungho’s philosophy of “making beds with cleanliness.”


Exterior view of Icheon Simmons Terrace Store. Photo by Jinju Han

Exterior view of Icheon Simmons Terrace Store. Photo by Jinju Han

View original image

Last year, Simmons invested 1.51 billion won in ordinary R&D expenses for technology innovation and quality improvement, up 21% from the previous year. Simmons’ sales last year were recorded at 323.9 billion won. Despite operating profit declining by about 23% due to rising costs of imported raw materials, higher labor expenses, and a strong exchange rate, Simmons maintained its position as the top bedding company in terms of sales for the third consecutive year. Since launching its premium collection "Beautyrest Black" in 2016 and boldly shifting its distribution structure from dealerships to directly managed stores, Simmons has continued to strengthen its position by adhering to a premium, quality-focused strategy.



A Simmons representative stated, "As a company specializing in beds and a brand dedicated to sleep, we will continue to uphold the essence of our business."


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing