A solution to the solar cell dilemma of simultaneously achieving both high efficiency and long lifespan has been proposed in Korea. The key lies in precisely controlling the internal structure of the perovskite solar cell's surface protective layer, thereby satisfying both high efficiency and long-term stability.


KAIST announced on March 24 that a research team led by Distinguished Professor Jangwon Seo from the Department of Biological Sciences and Chemical Engineering, in collaboration with the Korea Research Institute of Chemical Technology, has developed a "two-dimensional protective layer design technology" that enables perovskite solar cells to achieve both high efficiency and long-term stability.


AI-generated image. KAIST

AI-generated image. KAIST

View original image

Traditionally, a "3D/2D structure" strategy has primarily been used, in which a two-dimensional (2D) layer is overlaid on a three-dimensional (3D) perovskite crystal. This approach has been recognized as a method to reduce surface defects in solar cells and enhance their stability. However, when the structure of the two-dimensional layer is not robust, it can become deformed over time or gradually lose performance, exposing its limitations.


To address this, the joint research team introduced a structurally more stable "Dion-Jacobson (DJ)" structure as the two-dimensional perovskite protective layer. They also applied a design strategy that precisely controls the "n value," which indicates how many layers of perovskite are stacked within the protective layer.


The DJ structure increases structural stability by firmly connecting the perovskite layers on both sides using organic molecules. This is similar to using a stronger adhesive between bricks to prevent the structure from collapsing easily.


(Top) Dr. Chan-Soo Moon, former researcher at Korea Research Institute of Chemical Technology; (from left) Dr. Nam-Jung Jeon, Korea Research Institute of Chemical Technology; Jaehee Lee, integrated master's and doctoral student at KAIST; Hajin Na, master's student at KAIST; Jangwon Seo, distinguished professor of the Department of Bio and Chemical Engineering at KAIST. KAIST

(Top) Dr. Chan-Soo Moon, former researcher at Korea Research Institute of Chemical Technology; (from left) Dr. Nam-Jung Jeon, Korea Research Institute of Chemical Technology; Jaehee Lee, integrated master's and doctoral student at KAIST; Hajin Na, master's student at KAIST; Jangwon Seo, distinguished professor of the Department of Bio and Chemical Engineering at KAIST. KAIST

View original image

Inspired by the idea that adjusting temperature and time during the hardening of adhesive after stacking bricks results in a stronger and more orderly structure, the team controlled the heat treatment conditions to direct the stacking structure (n value) of perovskite layers within the two-dimensional protective layer as desired.


Through this process, they confirmed that charge transport was facilitated, which increased the solar cell's efficiency, while the robustness of the DJ structure also improved long-term stability.


Additionally, the team experimentally demonstrated that during the heat treatment process, the internal structure of the two-dimensional protective layer changes due to rearrangement at the interface where different materials meet. They thus presented both the principle for adjusting the protective layer’s structure and reproducible process conditions.


The perovskite solar cell applying this design strategy achieved a power conversion efficiency of 25.56% (with a certified efficiency of 25.59%) and demonstrated long-term stability by maintaining high performance under conditions of 85 degrees Celsius and 85% relative humidity (85% RH), as well as continuous light exposure.


Distinguished Professor Seo stated, "We were able to simultaneously resolve the solar cell dilemma of reduced lifespan with higher efficiency and reduced efficiency with longer lifespan by designing the structure of the surface protective layer. The technology developed by the joint research team is expected to operate stably even with changes in process conditions, making it applicable to large-area manufacturing processes required for commercialization."



Meanwhile, this research was co-first authored by Jaehee Lee, integrated MS-PhD student in the Department of Biological Sciences and Chemical Engineering at KAIST, and Dr. Chan-Soo Moon from the Korea Research Institute of Chemical Technology. The results were published in the international energy journal "Joule" on February 24.


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing