A shape-memory-based "smart actuator" that can autonomously change its form or return to its original shape without a motor has been developed in South Korea. This technology frees robots and space structures from motor-based systems during movement, thereby increasing the potential for realizing next-generation robotics and space equipment.


(From left) Sangyun Bae, PhD student; Seongsu Kim, Professor; Dajeong Kang, PhD student; Wonbin Kim, PhD. KAIST

(From left) Sangyun Bae, PhD student; Seongsu Kim, Professor; Dajeong Kang, PhD student; Wonbin Kim, PhD. KAIST

View original image

KAIST announced on March 22 that a research team led by Professor Seongsu Kim from the Department of Mechanical Engineering has developed a "hybrid smart actuator based on bidirectional shape memory materials" capable of reversible self-shape change using only external stimuli such as heat.


Reversible self-shape change refers to the property that allows a material to autonomously alter its form or return to its original state without the need for complex mechanical devices like motors.


The research team designed a hybrid composite actuator by combining a shape memory alloy (SMA) and a shape memory polymer (SMP), thereby leveraging the advantages of both materials. Shape memory alloys are metallic materials that return to their original shape when heated, while shape memory polymers are polymers that can change shape in response to heat or external stimuli.


Previously, shape memory materials faced limitations such as being unable to recover their original state after deformation (unidirectional) or having very slow recovery speeds. Furthermore, due to the differing strengths between metal alloys and polymers, repeated use often led to failure to restore the original shape.


To address these issues, the research team first strengthened the shape memory polymer by adjusting its chemical composition and reinforcing it with carbon fiber.


Additionally, they applied a "tape spring" structural form that bends like a measuring tape to the actuator. The tape spring structure stores energy during deformation and releases it instantaneously, creating a "snap-through" effect that enhances the speed and accuracy of movement. As a result, the team was able to improve both the material and the structural design simultaneously.


Front cover image of the journal 'Advanced Functional Materials.' KAIST

Front cover image of the journal 'Advanced Functional Materials.' KAIST

View original image

The developed actuator can perform fully bidirectional actuation, bending when heated and returning to its original shape as the temperature drops. Notably, the range of deformation has increased compared to previous versions, achieving an initial shape recovery rate close to 100%. The restoration speed has also improved, allowing for repeated operation without complex controls, according to the research team.


The shape memory actuator is considered highly practical, as it enables not only bidirectional deformation but also rapid shape change within one second and high deployment accuracy.


Professor Kim stated, "This research overcame the physical limitations of materials through innovative structural design and elevated the performance of shape memory actuators to a new level. In the future, this technology could be applied to fields such as 'robotic hands' or 'deployable space structures' that require repetitive gripping motions."



This research was conducted with Dajeong Kang, a doctoral candidate, as the first author. The results were published in the journal 'Advanced Functional Materials' issued by Wiley on January 19.


This content was produced with the assistance of AI translation services.

© The Asia Business Daily. All rights reserved. Unauthorized AI training and use prohibited.

Today’s Briefing